CMC-HX Low Voltage Soft Starter

• Certification: ISO9001, CE
• Protection: IP00, IP20
• Installation: wall mounted
• Transport Package: Standard Carton Package
• Origin: Shaanxi, China
• Model NO.: CMC-HX

Product Description

CMC-HX Low Voltage Soft Starter

CMC-HX soft starter is a new type of intelligent asynchronous motor starting and protection device. It is a motor terminal control device that integrates starting, display, protection anddata acquisition. With the fewer components, users can achieve more complex controlfunctions.
The Chinese and English interface display makes the operation much easier. As CMC-HX soft starter is inbuilt with a current transformer,
the external one is not needed.

Rated voltage: 380V
Adapted power: 7.5-630KW
Rated voltage: 690V
Adapted power: 1 5-700KW
Rated voltage: 1140V
Adapted power: 2 2-995KW

 

Control power	AC110V--AC220V±15%    50/60Hz
Three-phase power	AC380V±15% Standard wiring AC380V, 660V, 1140V±15% Internal delta connection AC380V±15%
Nominal current	18A--1000A,  22 rated values in total
Applicable motor	Ordinary squirrel cage asynchronous motor
Starting mode	Voltage exponential curve, voltage linear curve, current exponential curve, current linear curve
Stop mode	Free stop, soft stop, brake, and pump stop
Logical input	Impedance 1.8 KΩ, power supply +24V
Start frequency	Frequent or infrequent start available, start is advised not to exceed 10 times each other
Protective function	Overcurrent, overload, underload, overheat, phase failure, three-phase current imbalance, phase sequence detection, overheat of motor and frequency error, etc.
Protection level	IP00, IP20
Cooling type	Natural cooling or forced air cooling
Installation type	Wall mounted
Environmental condition	When sea altitude is above 2,000m, soft starter should be derated for use. Ambient temperature: -25-+45°C Relative humidity: less than 95%(20°C±5°C) Free of flammable, explosive and corrosive gas or conductive dust. Good ventilation for indoor installation and vibration is less than 0.5G

Welcome for enquiry and factory visit!