CMC-LX Low Voltage Soft Starter

• Certification: ISO9001, CE
• Protection: IP00, IP20
• Installation: wall mounted
• Transport Package: Standard Cartons
• Origin: Shaanxi, China
• Model NO.: CMC-LX

Product Description

CMC-LX Low Voltage Soft Starter

CMC-LX series motor soft starter is a new type of motor starting and protection device that combines power electronics technology, microprocessor and automatic control. It can start/stop the motor smoothly without steps, avoiding mechanical and electrical shocks caused by traditional starting methods such as direct starting, star-delta starting, and auto-buckling starting. And can effectively reduce the starting current and distribution
capacity to avoid capacity expansion investment. At the same time, the CMC-LX series soft starter integrates a current transformer inside, and users do not need to connect it externally.

Adapted power: 7.5-630KW

Service conditions
 

Control power	AC110V--220V±15%, 50/60Hz
Three-phase power	Standard wiring AC380V, 660V, 1140V±15% Internal delta wiring AC380V±15%
Nominal current	18A--1000A, 22 rated values in total
Applicable motor	Ordinary squirrel cage AC asynchronous motor
Start ramp mode	Voltage ramp start and current ramp start
Stop mode	Free stop and soft stop
Logical input	Impedance 1.8 KΩ, power supply +24V
Start frequency	Frequent or infrequent start available, start is advised not to exceed 10 times each other
Protective function	Phase failure, overcurrent, short circuit, SCR protection, overheat, phase current unbalance, wiring and inner fault
IP	IP00, IP20
Cooling type	Natural cooling or forced air cooling
Installation type	Wall mounted
Environmental condition	When sea altitude is above 2,000m, soft starter should be derated for use. Ambient temperature: -25-+45°C Relative humidity: less than 95%(20°C±5°C) Free of flammable, explosive and corrosive gas or conductive dust. Good ventilation for indoor installation and vibration is less than 0.5G

Welcome for enquiry and factory visit!